The LDT0-028K is a highly flexible sensor featuring a 28µm piezoelectric film with screen-printed silver electrodes. The film is laminated onto a 0.125mm polyester substrate, with electrodes connected via two crimp terminals. When the piezoelectric film is deflected from its center by a vertical force, high strain is generated, resulting in a high voltage output. When directly applied to a product, causing deformation, the LDT0 acts as a flexible switch, generating an output sufficient to directly trigger MOSFET and CMOS circuits. If supported by the terminals and allowed to vibrate freely, the device functions as an accelerometer or vibration sensor. Adding a mass or changing the free length of the element affects the sensor's resonant frequency and sensitivity. Offsetting can achieve multi- response. The LDTM-028K utilizes a cantilever beam structure, with terminals at one end providing signal output and a fixed mass at the other. This makes it a highly sensitive vibration sensor at low frequencies. Operating Temperature Range: 0-70°C Accuracy: 1.4V/g-16V/g Power Supply: Passive Features: Broadband (0.001Hz-1000MHz), high sensitivity, high dielectric strength, low acoustic impedance, high stability Type: Piezoelectric film cantilever beam Electrical Connection: PC board mount Typical Applications: Vibration detection, electronic targets, counter triggers, vital signs monitoring Color: As Shown Material: PCB Package Contents: 1 * Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.