Feature: 1. Stable Working: Ensuring stable working performance under 0.1 to 1.0MPa pressure, the air cylinder has high efficiency. 2. Double Action: Double action type together with single rod allows for loading on both directions, which is very reliable. 3. Thickened Body: Thickened and finished body promises small stretching as well as smooth operation without getting stuck. 4. Good Material: Having been through electroplating treatment, the aluminium alloy has high strength and not easy to deform. 5. Easy to Install: G1/4 installation hole with M16 x 1.5 thread will adds more convenience to the installation. Specification: Item Type: Air Cylinder Product Material: Aluminium Alloy Product Model: SC50-100-S Cylinder Bore: Approx. 50mm / 1.97in Cylinder Stroke: Approx. 100mm / 3.94in Thread Size: M16 x 1.5 Mounting Hole Thread: G1/4 Pressure Range: 0.1-1.0MPa Action Mode: Double Action Type Working Medium: Air Working Temperature: -20-80℃ Rod Type: Single Rod. Package List: 1 x Air Cylinder Note: 1. When the load changes during work, a cylinder with sufficient output power should be selected; 2. Under high temperature or corrosive conditions, the corresponding high temperature resistant or corrosion resistant cylinder should be selected; 3. In places with high humidity, a lot of dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures; 4. Before the cylinder connects to the pipeline, the internal impurities in the pipeline must be cleared to prevent debris from entering the cylinder; 5. The medium used in the cylinder should be filtered by a filter element above 40μm before being used; 6. In a low temperature environment, measures preventing freezing should be taken to prevent the moisture in the system from freezing;7. Avoid side load, otherwise the piston will bend, deform and damage the thread at the end. The single acting type cannot be loaded on the return; 8. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, and dustproof clogging cover should be added to the intake and exhaust ports, and pay special attention to the front and rear covers not to be disassembled.