Single-radio industrial access point based on IEEE 802.11ac (867 Mbps) or IEEE 802.11n (300 Mbps), radio operation at 2.4 GHz or 5 GHz, 2x2 MIMO, 80 MHz channels, full metal housing (-20°C - +50°C), 2 ext. antennas, power supply 12V, PoE (802.3af) Antenna: - Antenna connector type: SMA - Antenna type: External - Number of connectors: 2 Design: - Certification: EN 300 328/EN 301 893/EN 60950-1, EN 301 489-1, EN 301 489-17 - Housing material: Metal - Internal: No - International Protection (IP) code: IP50 - LED indicators: Yes - Placement: Wall - Product colour: Grey/White - Reset button: Yes Features: - 2.4 GHz: Yes - 5 GHz: Yes - 6 GHz: No - Automatic channel selection: Yes - Ethernet LAN data rates: 10/100/1000 - Frequency band: 2.4 - 2.4835, 5.15 - 5.7 - Maximum data transfer rate: 867 - Maximum data transfer rate (2.4 GHz): 300 - Maximum data transfer rate (5 GHz): 867 - Maximum indoor range: 30 - Maximum outdoor range: 150 - Modulation: 256-QAM - Networking standards: IEEE 802.11a/IEEE 802.11ac/IEEE 802.11b/IEEE 802.11d/IEEE 802.11e/IEEE 802.11g/IEEE 802.11h/IEEE 802.11i/IEEE 802.11n/IEEE 802.11u/IEEE 802.11w/IEEE 802.1x/IEEE 802.3/IEEE 802.3ab/IEEE 802.3af/IEEE 802.3at/IEEE 802.3u - Operating modes: Access Point (AP),Bridge,Client - Quality of Service (QoS) support: Yes - Receiver sensitivity: -80 dBm @ 54 MBit/s, IEEE 802.11an/ac: -75 dBm @ (MCS7, 20/40MHz), -71 dBm @ (MCS9, 20/40 MHz), -68 dBm (MCS9, 80 MHz)/-80 dBm @ 54 MBit/s, IEEE 802.11n: -77 dBm @ (MCS7, 20 MHz), -75 dBm @ (MCS7, 40 MHz)/2.4 GHz:/5 GHz: - Throughput data rate: 250 - VLAN support: Yes - Wi-Fi Multimedia (WMM)/(WME): Yes Logistics data: - Customs product code (TARIC): 85176200 Management features: - Firmware upgradeable: Yes - Syslog: Yes - Web-based management: Yes Operational conditions: - Operating temperature (T-T): -20 - 50 Packaging content: - AC adapter included: Yes - Cables included: LAN (RJ-45) - Mounting kit: Yes - Quantity per pack: 1 - Quick start guide: Yes Ports & interfaces: - DC-in jack: Yes - Ethernet LAN (RJ-45) ports: 1 - USB 2.0 ports quantity: 0 Power: - Power consumption (max): 11 - Power over Ethernet (PoE): Yes Protocols: - DHCP client: Yes - DHCP server: Yes - Management protocols: SSL, SSH, HTTPS, SNMP, Telnet, TFTP, SNMP, HTTP - Routing protocols: RIP-1/RIP-2 - Supported protocols: DNS, HTTP, HTTPS, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RADSEC, RTP, SNMP, SNMPv3, TFTP, TACACS+/IPv4:/IPv6:/NDP, SLAAC, DHCPv6, ICMPv6, DHCPv6, DNS, HTTP, HTTPS, PPPoE, RADIUS, SMTP, NTP, BGP Security: - Auto Wireless Distribution System (WDS): Yes - IGMP snooping: Yes - Remote Authentication Dial-In User Service (RADIUS): Yes - Security algorithms: 802.1x RADIUS/AES/EAP-AKA/EAP-FAST/EAP-MD5/EAP-PEAP/EAP-SIM/EAP-TLS/EAP-TTLS/HTTPS/MSCHAPv2/SSH/SSL/TLS/WEP/WPA/WPA2 - Security features: Terminal Access Controller Access-Control System Plus (TACACS+), Password authentication protocol (PAP) Vendor information: - Brand Name: Lancom Systems - Homepage: https://**.lancom-systems**/products/wireless-lan/industrial-access-points/lancom-iap-821 - Warranty: 3 - Product.Details.Specifications.Level1: Network - Product.Details.Specifications.Level2: Wireless Network - Product.Details.Specifications.Level3: Wireless Access Points