1. High speed single-chip microcomputer is used for voltage sampling test, and LED lamp is driven to display voltage (by no means other products on the market use purchased voltmeter heads, which are installed separately) to achieve board card integration and reduce defective rate (because the current is constant, only the voltage display function is used.) 2. 0-300V adaptive voltage, suitable for most series and parallel lamp bead tests. During the test, the gradual startup mode is adopted, the voltage is automatically adapted, the current is gradually increased, and the lamp beads will not burn, and the normal brightness can be achieved in three to five seconds. The positive and negative poles of the lamp bar and lamp bead are connected inversely, without burning the lamp bar and lamp bead. 3. Digital display of real-time voltage output, with adjustable voltage, the voltage value can be self calibrated. The digital meter adopts green light-emitting tube. 00 indicates short circuit and 300V indicates open circuit. The display voltage of each group of LED light bars of the same LCD TV shall be the same. 4. Cold and hot isolation, never get electric shock. The integrated design of the power cord and the machine box makes it easy to carry when going out. 5. You can light up the LCD TV screen without removing the screen. (The screen with bad lamp beads is lit as well. The LCD TV is generally divided into several groups in parallel. The voltage can be used to see which group of voltages are different, so as to determine which group of LED lamp beads are .) Name:LED lamp bead light strip tester Size:180x105x40MM Weight:254.5G When testing, do not look directly at the lamp bead because of the highlighted version. To avoid eye injury. Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.