<br>Product Description:<br>-- Double Din Changed To Alone Din Metal Kit for 7 9 or 10 Inch Car Audio GPS MP5 Android System-- Color:Silver-- Material: SECC+OTHER-- Installation size: 2 DIN 9 inches or 10 inches Changed To Alone Din-- Made in China, top quality.<br>Application scenario<br>-- Many car owners and friends have encountered this problem when modifying car audio: their car is only suitable for installing a separate Din car audio (especially the screen installed on the top of the car center console), but the 9-inch or The 10-inch screen car audio is all dual Din structure, this is the problem to be solved by this product.<br>Products Show<br>Modification step<br>step 1:As shown in Figure 1, unscrew the 4 screws that fix the heat sink of the 9-inch (or 10.1-inch) car audio. 4 screws are reserved for fixing the metal front bracket behind.<br>step 2:Gently pick up the heat sink (as shown in Figure 2Figure 3), and carefully pull out the cables from the S1, S2, S4, and S5 sockets.Note: Be careful not to damage the cables during the entire installation steps! !<br>step 3:As shown in Figure 4, place the metal front bracket as shown in Figure 4 (note the front and back of the metal bracket and its direction), and fix the metal front bracket with the 4 screws that fixed the heat sink just removed.<br>step 4:As shown in Figure 5, plug the cables of the S1, S2, S4, and S5 4 sockets as they are. Note: When the length of the 40PIN cable connected to S1 is insufficient, the 40PIN adapter socket and 40PIN cable in the product acceories can be used to extend. This picture Take a 40pin TFT screen car audio as an illustration, when your car audio is a 60pin TFT screen (the S1 socket is empty, and the S3 socket has a plug-in cable).<br>step 5:As shown in Figure 6, fix the PCB and heat sink aembly on the metal PCB bracket with 4 KM2.5x6 screws (pay attention to the direction of the metal PCB bracket).<br>step 6:As shown in Figure 7, fix the metal bracket and heat sink aembly to the metal front bracket with 4 KM2.5X6 screws according to the required position, and the installation is now complete (Figure 8).<br>